Amity CL-800TA
NT$ 0
立即購買NT$ 0
立即購買日本日立鋼廠專為電剪刀刃調配研製 ,耐磨銳利、特殊鋼材。
鎢鋼鉻合金,壽命比一般刀刃多3倍,黃金切割,38o切口鋒利,剪髮速度快3倍,U型刀口,剪髮量比一般多2倍。
鎢鋼鉻合金,壽命比一般刀刃多3倍
日本鋼廠專為電剪刀刃調配研製,鋒利堅硬耐磨,壽命比一般多3倍。
Made in Japan Tungsten steel blades has longer lifespan, longer than other ordinary blades materials 3 times.
黃金切割,38°切口鋒利,剪髮速度快3倍
航太技術製造全球獨創,38°刀口銳利,大量大束切斷頭髮,輕鬆快速剪髮。
Precision made 38° cutting edge enhanced blade cutting efficiency.
U型刀口剪髮量比一般多1倍
可大量快速剪髮,一氣呵成、創意無窮,剪髮時間省一半。
U-shaped feature design on blade allows quickly haircut
附件
注意事項
1.刀刃為精密機件,勿碰撞。
2.使用後務必清潔及注油,才不會損傷刀刃及馬達壽命。
NOTICE
• Please use with the supplied adapter only, Model NO.: KH-50.
• Always handle with care and clean regularly to ensure blade maximum performance.
• The clipper is for human only, don’t apply on animals.
• For dry location use only. DO NOT expose to water.
• Close supervision is required when this clipper is used by, on, or near children.
• DO NOT use while bathing or in a shower, also DO NOT use with cord when thunder.
• Except when charging, always unplug this clipper from the electrical outlet after using. Also unplug before cleaning.
• When this appliance is not working properly, return to service for examination and repair. Don’t disassembly by user.
售後服務
1.為保障您的權益,請要求購買店家將店名、地址、購買日期、商品型號等資料填寫清楚,才享有自購買日起保證一年內免費維修服務。
2.超過保固期(1年以上)或無法提供保證書將酌收200元基本檢測費。
3.未蓋店章或購買日期填寫不實者,恕難免費服務。
4.保固範圍依說明書內標示為準,消耗品及人為疏失、除外條款等,恕不在保固範圍內。
Service policy(Taiwan region)
規格
商品名 Product |
CL-97TA 日立專業電剪 Hitachi CL-970TA hair clipper |
充電 Run time |
充電:充電5小時/使用60分鐘 Run time: 60mins, Charge time: 5hrs |
速度 Speed |
速度:高速6500RPM(適用於大量剪髮)/低速5500RPM(適用於少量修剪) Speed: High 6500RPM(Cut)/ Low 5500RPM(Trim) |
噪音 Noise: |
噪音:53dB Noise: 53dB |
NT$ 0
立即購買Amity CL-800TA
NT $0
規格名稱
數量